|
|
High T.E.C. Automatic Spray Guns
|
|
|
|
 The High T.E.C. System's main features: HIGH T.E.C. spray guns improve your paint finishing, reduce your painting costs and increase the profitability of your painting operation. HIGH T.E.C. is the result of years of research in the dynamics of fluids, at our laboratories in Yokohama. Thanks to instruments such as spectrograph and three-dimensional CAD, we have formulated mathematical models and tested prototypes. HIGH T.E.C. spray guns have been developed to meet the requirements of the Environmental protection Act and to provide excellent atomisation with all paint materials, also developed to meet the requirements of this act. What sets HIGH T.E.C. apart from other systems is the incredible Transfer Efficiency: in independent tests efficiencies of up to 95% were achieved, far higher than the minimum 65% required by the EPA. HIGH T.E.C. Spray guns have many features and benefits including: - Transfer Efficiency issued by MIRRC THATCHAM. - Developed for use with high solid and water borne coatings. |
|
High T.E.C. Automatic Spray Gun TOF6 |
|  | | These spray guns can apply at low pressure under 0.25 MPa, since atomizing air can be controlled regardless of piston operating pressure, due to the operating air and atomizing air being separate. Thanks to the lightweight, compact and simple design it is easy to mount on machines. Pattern adjusting set is equipped on TOF6. Read more here: Download (0,8 MB) | | | |
|
|
|
High T.E.C. Automatic Spray Gun TOF5 |
|  | | Compact type spray guns with common use of both piston operating air and atomizing air using the same piping. Lightweight, compact and simple design makes it easy to mount on machines (n.b. that it can't apply under 0.25 MPa) Pattern adjusting set is equipped on TOF5. When applying at low pressure, use TOF6. Read more here: Download (0,8 MB) | | | |
|
|
|
WAM 220 Mangusta Automatic Spray Gun with Manifold |
|  | | HIGH ATOMIZATION• Patented pre atomization nozzle technology • High Transfer Efficiency with latest unique ANEST IWATA air cap technology • Able to handle the most difficult water base and solvent borne fluid materials with minimum overspray EASY TO USE• No need to use solenoid valve: atomization and fan air close together with air air piston • Two steps detachment technique: remarkable reduction of production downtime • Quick air cap disassembly • Index (90°- 180°) air cap • 16 position fluid needle adjustment EASY TO MAINTAIN• Simple quick disassembling from manifold • Fluid needle and air piston disassembled from rear of spray gun • Needle packing with automating compensation of wearing • Smooth stainless steel fluid passages to comply with all water based materials Download Brochure (1 MB)Download Instruction Manual (2,5 MB) | | | |
|
|
|
WA 100 automatic spray gun |
|  | | GENERAL PURPOSEFluid needle packing in PTFE Fluid nozzle + fluid needle set in stainless steel Gun body insert in stainless steel Weight: 480 g   | | | |
|
|
|
|  | | GENERAL PURPOSECertificate of Compliance issued by THATCHAM certifies that "Transfer Efficiency" achieved with the materials detailed in the test report were: PRIMER : 93.2% SOLID COLOUR: 85.9%< BASECOAT: 82.3% CLEAR LACQUER: 77.4% Fluid needle packing in PTFE Weight: only 500 g. Fluid nozzle + Fluid needle set in stainless steel Fluid nozzle + Fluid needle set in tungsten carbide available Gun body insert in stainless steel | | | |
|
|
|
WA 200 Flat & Thin™ automatic spray gun |
|  | | FOR LEATHER AND WOOD INDUSTRYThe Flat & Thin™ Technology can be applied in all cases in which a short distance from the piece to paint is required; it allows a combination of a short distance and large pattern area, consequently it is possible to cover hard to reach and hidden areas. Flat & Thin™ is an advanced technology which combines air cap and nozzle-needle set, to cover a homogeneous and large film surface. This system allows the paint to reach the surface with the highest transfer efficiency and the lowest overspray. | | | |
|
|
|
WA 77 automatic spray gun |
|  | | GENERAL PURPOSEFor use in the wood, leather and plastic markets Low cost High efficiency auto spray gun | | | |
|
|
|
LPA 200 automatic spray gun |
|  | | GENERAL PURPOSEHigh volume automatic gun Low pressure automatic gun | | | |
|
|
|
WRA200 S8 automatic spray gun |
|  | | ROBOT APPLICATIONSCertificate of Compliance issued by THATCHAM certifies that "Transfer Efficiency" achieved with the materials detailed in the test report were: PRIMER : 93.2% SOLID COLOUR: 85.9% BASECOAT: 82.3% CLEAR LACQUER: 73.5% Possibility of paint recirculation. Different air adjustments, air atomisation and spray pattern. Fluid adjustment knob lock mechanism with 88 positions. AVAILABLE IN WB VERSION | | | |
|
|
|
Wra 100 automatic spray gun |
|  | | ROBOT APPLICATIONS Air nipple and fluid nipple: quick connector Weight: 400 g | | | |
|
|
|
WRA 200 S19 Automatic Spray Gun |
|
|
|