750 mm 1.5Kw MOBILE INFRA RED UNIT

Anest Iwata is pleased to announce the launch of a new Infra product to compliment the existing excellent range. The new 1.5Kw 750mm cassette is ideal for drying sills, bumpers and lower area of the vehicle due its new fixing bracket which also swivels.

New swivel joint makes the repair process nice and easy

- Dimensions: 750mm x 140mm x 85mm
- Electrical Specification, 220/240.
- Volts: 1.5Kw
- Single Phase.

- New 750mm cassette head is perfect for longer areas, including sills and bumpers.

- The new swivel joint and locking devise means you can now adjust to any angle required. Great for drying windscreen pillars and back of top quarters.

- No handle on the back makes the 1.5KW infra red easy to lower to the floor to dry those difficult hard to reach areas.

HEAT T.E.C. HL 1000 infrared drying unit

Heat T.e.c. HL 1000 is a mobile unit used for rapid paint curing.

HLP 1000
Hand held model
HLP 1000S
Hand held model with separate stand
HLP 1000T
Two hand held models with one stand

HEAT T.E.C HL 3000 infrared drying unit

main specifications

Minimum operating distance: 500 mm
Area coverage: 800 x 1000 mm
Max vertical curing height: 2030 mm
Max horizontal curing height: 1800 mm

HEAT T.E.C HL 4000 infrared drying unit

main specifications

Minimum operating distance: 500 mm
Area coverag : 800 x 1300 mm
Max vertical curing height: 2030 mm
Max horizontal curing height: 1800 mm

HEAT T.E.C HL 4500 infrared drying unit

main specifications

Minimum operating distance: 600 mm
Area coverage: 1000 x 1250 mm
Max vertical curing height: 2150 mm
Max horizontal curing height: 1800 mm

HEAT T.E.C HL 6000 infrared drying unit

main specifications

Minimum operating distance: 600 mm
Area coverage: 2000 x1000 mm
Max vertical curing height: 1800 mm

PAINT HEATER

THE PAINT HEATER MODEL 32X1R AND 32X2R

This equipment has been designed to solve the problem of the low temperatures while painting, consequently:

Considerable reduction of paint viscosity
Major thickness of paint film and less fluid passages
Reduction of pressure and better spray atomisation
Reduction of solvent consumption
Reduction of drying time.

The paintheater has been designed in observance of the antideflagration regulations, it also allows to use of various kinds of paints and solvents, thanks to the stainless steel utilisation.

AQUADRY PAINT DRYER

INDISPENSABLE KIT FOR THE ACCELERATION OF FLASH OFF OF WATERBASED COATINGS

The stand has a slide and lock height adjustment.
The gun brackets can be moved along the length of the arm and positioned to suit.
Each arm can be used independently
The guns are provided with quick couplings which allow fast disassembling
Guns are easily adjustable
Venturi air entrainment increases air flow by 6:1
The guns are provided with quick couplings which allow fast disassembly
Air regulator included
Guns are easily orientable
The stand has a slide and lock height adjustment. The gun brackets can be moved along the length of the arm and positioned to suit.
The height of stand is 180 cm
The width of arm is 80 cm (38,5 each side), and it stands 2 aquadry guns
Variable airflow
Max pressure: 7 bar
Max air consumption: 2 x 600 l/min